Mitsubishi MOTORS L200 1996, Руководство по ремонту, Страница: 1127 / 1723

14
4. After carrying out steps 1. To 3., turn the ignition
switch to ON. Within 3 seconds after turning the
ignition switch to ON, turn off the stop lamp
switch (release the brake). Then, turn the sto
lamp switch on and off a total of 10 times.
NOTE
If the ABS-ECU function has been stoppe
because of fail-safe operation, it will not be
possible to erase the diagnosis codes
Ignition switch
Stop lamp switch
ABS warning lamp
ABS-ECU memory
<Added>
4. Ensure that the diagnostic trouble codes have been
erased.
When diagnostic trouble codes (Nos.21 to 24)(for
vehicle wheel speed sensor system failures) occur,
the above procedures may not erase those codes. In
that case, turn the ignition switch OFF, then repeat
steps 1 to 3 above.
35B-5
ABS <2WD> - Troubleshooting
3. <Changed>
OFF
ON
OFF
ON
OFF
ON
9th
With-
in 1s
7th
With-
in 1 s
4th 2nd
With-
in 1s
3rd
With-
in 1s
8th 6th 5th
1s
With-
in 1s With-
in 1s
AW0558AS
Within 3
seconds
With-
in 1s With-
in 1s With-
in 1s
Erasing of
ABS-ECU
diagnosis
codes
complete
1st
10th
With-
in 1s