Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1423 / 1723

SRS –
SRS Diagnosis Unit (SDU)
52B-26
SRS DIAGNOSIS UNIT (SDU)
52400210113
Caution
1.
Disconnect the battery (–) terminal and wait
for 60 seconds or more before starting work.
Furthermore, the disconnected battery
terminal should be covered with tape to
insulate it. (Refer to P.52B-3, No.4.)
2. Never attempt to disassemble or repair the
SDU. If faulty, replace it.
3. Do not drop or subject the SDU to impact
or vibration.
If denting, cracking, deformation, or rust are
discovered in the SDU, replace it with a new
SDU. Discard the old one.
4. After deployment of an air bag, replace the
SDU with a new one.
5. Never use an ohmmeter on or near the SDU,
and use only the special test equipment
described on P.52B-5.
REMOVAL AND INSTALLATION
Pre-removal Operation
D
Turn the ignition key to the “LOCK” position.
D
Front Floor Console Removal (Refer to GROUP
52A.)
Post-installation Operation
D
Front Floor Console Installation (Refer to GROUP
52A.)
4.9 Nm
4.9 Nm
4.9 Nm
1
2
3
Removal steps
"
C
A D
Post-installation inspection
D
Negative (–) battery cable connection
A
A
" "
B
A
1. Harness connector
"
A
A
2. SRS diagnosis unit (SDU)
3. SRS diagnosis unit (SDU) bracket