JKS Adjustable Trackbar Installation
PN OGS125 / OGS126
Page 1 of 3
Installation
Instructions
Product:
Adjustable Trackbar
Part Number:
PN OGS125 / OGS126
Welcome
CONGRATULATIONS on purchasing a new
Adjustable Trackbar from JKS Manufacturing.
We are committed to providing you with the
best products available and your satisfaction is
our first priority.
PLEASE READ these Installation Instructions
carefully, and save them for future reference,
as they contain important installation and
maintenance information.
Important
NOT COMPATIBLE WITH
right hand drive
vehicles.
CHECK TORQUE SPECIFICATIONS
regularly.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Tie Rod End Remover *
Tape Measure
1-7/16” Open-End Wrench
9/16” Drill Bit
Flat Metal File *
Heavy Duty Ratchet Strap *
Anti-Seize Lubricant
Grease Gun with Zerk Fitting Coupler
Wheel Bearing Grease
* Asterisk denotes tools that are not required for some
applications. Thoroughly read instructions first to
determine which tools will be required for your
application.
Parts
A
OE Rubber Bushing
B
Male Threaded (Axle) End
C
1” NF Jam Nut
D
Female Threaded (Chassis) End
E
9/16” SAE Flat Washer
F
Preload Washer
G
9/16” NF GR8 Ovalok Nut
H
Polyurethane Bushing
I
Snap Ring
J
9/16” x 4-1/2” GR8 Greaseable Bolt
K
Preload Washer
L
2.5” Johnny Joint Ball
M
Polyurethane Bushing
N
Tapered Split Cone