Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 203 / 362

13 - 3 13 - 3
MELSEC
13 COMMUNICATION BETWEEN THE MASTER STATION AND
INTELLIGENT DEVICE STATION (AJ65BT-R2)
13.2.2 Parameter settings
The following shows the master station’s parameter settings by the CC-Link Ver.2
Utility.
<Parameter settings screen> <Other settings screen>
7)
6)
5)
8)
9)
10)
11)
12)
13)
14)
16)
1)
3)
4)
15)
2)
(1) Parameter settings
The following shows the parameter setting values. The parameter setting check
list and the station information setting check list in Appendix can be used for the
setting.
Table 13.1 Parameter Setting Check List
Setting item Setting range/Item
1) Channel No.
Channel No. 81 / Channel No.82
Channel No. 83 / Channel No.84
2) Sta. No./Type No.0 Master station / Local station / Standby master station
3) Transmission rate 156kbps / 625kbps / 2.5Mbps / 5Mbps / 10Mbps
4) Mode
Remote net [Ver.1 mode] / Remote net [Ver.2 mode]
Remote net [Additional mode] / Off line
Operational
settings
5) Expanded cyclic single / double / quadruple / octuple
6) Occupied Sta.
Occupies 1 station / Occupies 2 stations
Occupies 3 stations / Occupies 4 stations
7) Input for Err. Sta. Hold / Clear
Other settings
8) Retry count 3 Times
9) Automatic reconnection
station count
1 Modules
10) Standby master station No.
No.0
11) Delay information setting
0 50 micro sec
12) Driver WDT Monitoring Time No setting / 8 ms
13) Block data assurance per
station
Disable / Enable
14) Link refresh cycle No setting / ms
Station information
settings
15) All connect count 1 Modules
Table 13.2 Station Information Setting Check List
Sta. No. Station type
Expanded
cyclic
Occupied
Sta.
Remote
station points
Reserve/invalid
station select
Intelligent buffer select (word)
Send Receive Automatic
16) 1 Intelligent device station single
Occupies
1 station
32 points No setting 64 64 128
2
3