Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 134 / 362

6 - 10 6 - 10
MELSEC
6 PARAMETER SETTINGS
6.4.2 Local station network parameter settings
The descriptions in this section are based on the following system configuration
example.
For details of the CC-Link Ver.2 utility, refer to Section 8.2.
Master station
QJ61BT11N
Remote I/O
station
(occupies
1 station)
Local station
Q80BD-
J61BT11N
(occupies
4 stations)
Station
number 1
Ver.2 compatible
remote device
station
(occupies
1 station)
Station
number 2
Station
number 3
Station
number 7
Remote I/O
station
(occupies
1 station)
Ver.2 compatible slave station
added to the existing system
Setting item Setting value
Sta. No. 3
Type Local station
Transmission rate 10 Mbps
Mode Remote net [Additional mode]
Operational
settings
Expanded cyclic double
Occupied Sta. Occupies 4 stations
Input for Err. Sta. Clear
Other
settings
Retry count ----
Automatic reconnection station count ----
Standby master station No. ----
Delay information setting ----
Driver WDT Monitoring Time 250 8 ms
Block data assurance per station Disable
Link refresh cycle ----
Station information
settings
All connect count ----
Station information ----
Station information setting items
Setting item Setting value
No. / Sta. No. ---- ---- ---- ----
Station type ---- ---- ---- ----
Expanded cyclic ---- ---- ---- ----
Occupied Sta. ---- ---- ---- ----
Remote station points ---- ---- ---- ----
Reserve/invalid station select ---- ---- ---- ----
Intelligent buffer
select (word)
Send ---- ---- ---- ----
Receive ---- ---- ---- ----
Automatic ---- ---- ---- ----
: Setting not required