Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 156 / 362

8 - 16 8 - 16
MELSEC
8 OPERATING THE UTILITY SOFTWARE
POINT
(6) The setting of "Standby Master Station No." in the network parameter is
required to execute a line test (hardware) for the standby master station.
(7) When data link has started by the standby master station, a line test (hardware)
cannot be executed.
[Operation Procedure]
After selecting "Line test (Hardware)" in the Test item, click the [Start] button.
The line test screen appears.
Line test screen
1)
2)
3) 4)
Item Description
1) All stations (1 to 64) Select this when performing the line test on all stations.
2) Selected station Select this when performing the line test on a single station. (Setting range: 1 to 64)
3) OK button
Executes the test.
4) Cancel button
Cancels the test.
Line test result screen (For "All stations (1-64)" only)
7)
5)
6)
(Display when 4 stations are connected.)
Item Description
5) Each station information
Displays the information of each station.
White: Normal station, Red: Error station
6) Test result
Displays the status of each station.
In the event of an error, the error code is displayed.
7) OK button
Closes the line test result screen.