Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 318 / 362

App - 56 App - 56
MELSEC
APPENDIX
Appendix 7 About "Parameter backup/restore tool"
This section describes the "Parameter backup/restore tool" that is used for re-using
existing parameters.
The "Parameter backup/restore tool" is a dedicated tool for backing up and restoring
CC-Link board parameters, and is stored in the SW1DNC-CCBD2-B CD-ROM.
(Backup)
Stores parameters of the CC-Link board that is currently mounted to the PC into
files.
(Restore)
Reads the backed-up parameters and stores them into a CC-Link board.
By using this dedicated tool, the user can re-use existing parameters without being
aware of the version of the CC-Link board.
Appendix 7.1 Operation procedure
The following explains the operations of "Parameter backup/restore tool."
Appendix 7.1.1 Starting and exiting the tool
(1) Starting the tool
The following describes how to start "Parameter backup/restore tool".
(a) Insert SW1DNC-CCBD2-B into the CD-ROM drive.
(b) Click [Start] - [Run].
(c) Click the Browse button in the "Run" dialog box and select the Parameter
backup/restore tool (PrmBkup.exe
1
).
1: "PrmBkup.exe" is stored in the following folder:
<CD-ROM drive>-<Tool>-<US>
(d) Check the displayed path, then click the OK button.
(e) The "Parameter backup/restore tool" dialog box is displayed.
(2) Exiting the tool
To exit the "Parameter backup/restoration tool," click [Close(C)] in the system
menu, the X button at the top right of the dialog box, or END button at the
bottom of the screen.