Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 100 / 362

4 - 46 4 - 46
MELSEC
4 FUNCTIONS
(1) Remote net ver.2 mode
This mode is designed to configure a new system.
The number of cyclic points can be increased as indicated below.
Per station, Max. RX/RY: 128 points, RWw/RWr: 32 points
(In the case of 1 station occupied with octuple setting)
Per CC-Link system, Max. RX/RY:8192 points, RWw/RWr: 2048 points
Master station
Ver.2 mode
Remote I/O station
(Station number 1:
Occupies 1 station)
Output
Remote output RY
Remote input RX
quadruple double octuple
Station number 1
Station number 2
Station number 3
Station number 4
Station number 5
Station number 6
Station number 7
to
Station number 1
Station number 2
Station number 3
Station number 4
Station number 5
Station number 6
Station number 7
to
Remote output RY
Remote device station
Ver. 2 compatible
(Station number 2:
Occupies 1 station)
Local station
Ver.2 mode
(Station number 3:
Occupies 4 stations)
Ver. 2
compatible
remote
output RY
Remote device station
Ver. 2 compatible
(Station number 7:
Occupies 1 station)
[Setting method]
The setting is performed at <<Parameter settings>> in the CC-Link Ver.2 utility.
Refer to Section 8.2.5 for setting details.
POINT
(1) In the remote net ver.2 mode, 0 points can be set for a reserved station.
(2) In the remote net ver.2 mode, RWw and RWr of the remote I/O station are set
to 0 points. Care must be taken to calculate the word points for the
programmable controller CPU side.