Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 126 / 362

6 - 2 6 - 2
MELSEC
6 PARAMETER SETTINGS
Table 6.1 Parameter setting items list
: Setting required : Setting not required
Description
Master
station
Local station
Standby
master station
Reference
section
Setting item
1) Sta. No./Type
Sets a station No. and a type of the own station.
Setting range
Sta. No.: 0, 1 to 64 (Default: 1)
Type:
When Sta. No. is 0:Master station,
When Sta. No. is 1 to 64: Local station
(Default), Standby master station
Section
4.3.4
2) Transmission rate
Set the transmission speed of the CC-Link Ver.2 board.
Setting item: 156kbps, 625kbps, 2.5Mbps, 5Mbps,
10Mbps (Default)
----
3) Mode
Set the operation mode of the own station.
Setting item: Remote net ver.2 mode
Remote net additional mode
Remote net ver.1 mode (Default)
Offline ----
Operational settings
4) Expanded cyclic
Make the expanded cyclic setting when increasing the
number of cyclic points. (Can be set in remote net ver.2
mode or remote net additional mode)
Setting item: single (Default), double, quadruple,
octuple
Section
4.4.7
5) Occupied Sta.
Set the occupied station count by the own station.
Setting item: occupies 1 station (Default), occupies
2 stations, occupies 3 stations,
occupies 4 stations
----
6) Input for Err. Sta.
Set how to handle the input data in the event of a data
link error.
Setting item: Hold, Clear (Default)
----
Other settings
7) Retry count
Set the number of retries to be performed when a
communication error occurs.
Setting range: 1 to 7 (Default: 3)
----
8) Automatic
reconnection
station count
Set the number of slave stations that can be returned to
the network within 1 link scan.
Setting range: 1 to 10 (Default: 1)
Section
4.3.2
9) Standby master
station No.
Set the station number of the standby master station.
Setting range: 0 to 64 (Default: 0)
Section
4.3.4
10) Delay
information
setting Set 0 to "Delay information setting". ----
11) Driver WDT
Monitoring Time
Set the driver WDT monitoring time. (Unit: 8ms)
Select "Use driver WDT function" to enable this function.
Setting range: 1 to 32767 (Default: No setting)
1
----
12) Block data
assurance per
station
Set the block data assurance per station to enable/disable.
Select "Assure block data" to enable this function.
(Default: Disable)
Section
4.3.6
13) Link refresh
cycle
Set the link refresh cycle.
2
（
Unit: ms
）
Setting range: 1 to 1000 (Default: No setting)
3
----
1: When the driver WDT function is enabled, the recommended value 250 will be displayed in the set value of driver WDT
monitoring time irrespective of the previous set value.
2: The link refresh cycle can be set only when block data assurance per station setting is enabled.
3: When the block data assurance per station is enabled, the recommended value 1 will be displayed in the set value of
link refresh cycle irrespective of the previous set value.
6