Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 146 / 362

8 - 6 8 - 6
MELSEC
8 OPERATING THE UTILITY SOFTWARE
Item Description
5) Error status
Displays the status of the error currently detected.
Display Description
Normal Normal status
Transport error An error was detected in the transmission path.
Parameter error A parameter error was detected.
CRC error An error in the received data was detected.
Timeout error A timeout error was detected in data reception.
Abort error An error was detected in data communications.
Setting error
An error was detected in the station No./station type setting, the
transmission rate setting or the mode setting.
Illegal An error arising from some other cause was detected.
6) Board type Displays the model name of the CC-Link Ver.2 board.
7) Product information Displays the product information (serial No., function version).
8) IRQ No. Displays the IRQ No.
9) ROM version Displays the ROM version.
10) Memory Displays the 2-port memory.
11) I/O port Displays the I/O ports.
12) Present Error
An error code of the error currently identified on the CC-Link Ver.2 board is indicated in
hexadecimal notation.
When no error is currently detected, "No Error" is displayed.
13) Link scan time (ms) Displays the maximum, minimum and current link scan times.
14) Link refresh time (ms)
Displays the maximum, current and minimum link refresh time of the CC-Link Ver.2 board.
"Block data assurance per Station" indicates "0" when disabled.
15) LED information
Displays the following LED states.
LED Color ON OFF Flashing
RUN Green Operating normally.
A WDT error has
occurred, or the board
is being reset.
ERR. Red All stations are faulty.
No communication error
has occurred, or the
board is being reset. There is a faulty
station or station No.
is duplicated.
TIME Red
Due to cable
disconnection or noise
affecting the transmission
path, no responses are
received from all stations.
Responses received
from all stations
MST Green
Operating as the master
station Operating as other than
the master station
SW Red Switch setting error No switch setting error
LINE Red Cable disconnection error
No cable disconnection
error
S MST Green
Operating as a standby
master station
Operating as other than
the standby master
station
M/S Red Station duplicated error Station not duplicated
LOCAL Green
Operating as a local
station Operating as other than
the local station
PRM Red Parameter error No parameter error
16) OK button
Closes the Board detail information screen.
17) Save SB/SW button
Saves the information of all the CC-Link Ver.2 board SB/SW areas selected on this screen in
CSV format.