Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 137 / 362

7 - 1 7 - 1
MELSEC
7 INSTALLING AND UNINSTALLING THE SOFTWARE PACKAGE
7 INSTALLING AND UNINSTALLING THE SOFTWARE PACKAGE
This chapter explains how to install and uninstall the software package.
7.1 Installation and Uninstallation Precautions
The following are the precautions when installing and uninstalling the software
package.

Log on as a user having administrator authority.

Make sure to close other applications running on Windows (including resident
software such as antivirus software) before installation and uninstallation.

The installer may not work normally because the update program of operating
system or other companies' software such as Windows Update
R
and Java update
may start automatically. Please install the driver after changing the setting of the
update program not to start automatically.

Check if the display settings on the [Device Manager] or other relevant functions are
correct, and install an appropriate display driver.
Or update the Windows operating system.

The language switching function of the operation system set by "Regional and
Language Options" on the Control Panel screen is not supported. The installation or
uninstallation may not work normally if the language setting is changed.

Install SW1DNC-CCBD2-B after uninstalling SWnDNF-CCLINK.

When using Windows 10, Windows 8.1, Windows Server 2012 R2, Windows 8, or
Windows Server 2012, .NET Framework 3.5 is required. Enable the .NET Framework
3.5 (including .NET 2.0 or 3.0) in "Turn Windows features on or off" on the control
panel.

A network drive cannot be specified as the installation destination.

When the parameters have been set with the utility installed, the parameters are
initialized at installation. Save the parameters with the save file function before
installing the utility.

When the software package has been installed in the environment that the creation
of 8.3 filename is disabled, the software package may not be uninstalled. Enable the
creation of 8.3 filename before installing the software package. For the method on
how to check and change the status of 8.3 filename creation to enable/disable, refer
to the website of Microsoft Corporation.

When using SW1DNC-CCBD2-B version 1.17T or later, apply Service Pack1 and
Security Update for Windows(KB3033929) in Windows 7 and Windows Server 2008
R2.

When installing the software package, enable "User Account Control: Detect
application installations and prompt for elevation" in 'Local Security Policy' in
Windows.
7