Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 314 / 362

App - 52 App - 52
MELSEC
APPENDIX
Appendix 5.2 Functional comparisons with CC-Link module
The main functional comparisons between the CC-Link Ver.2 board (Q80BD-
J61BT11N) and CC-Link Module (QJ61BT11N, Q81BD-J61BT11) are shown here.
For details of the functions, refer to Chapter 4.
Function
Q80BD-
J61BT11N,
Q81BD-
J61BT11
QJ61BT11N
Cyclic
transmission
function
Communication in
Remote net mode
Compatibility with Remote net ver.2 mode
1
Compatibility with Remote net additional mode
1
Compatibility with Remote net ver.1 mode
Communication in Remote I/O net mode
Block data assurance
per station setting Function to prevent link data separation per
station
2
Transient
transmission
function
Other station access by GX Developer
Other station access by dedicated instructions
Other station access by MELSEC data link library
Standby master
function
Standby master function
Master station duplex function
Reserved station function
Error invalid station setting function
RAS function
Hardware Test function
Automatic return function
Slave station cut-off function
Temporary error invalid station setting function
Slave station refresh/forced clear setting function for programmable
controller CPU STOP
Improved
usability
Automatic CC-Link startup
Remote device station initialization procedure registration function
Event issue function
Multiple CPU system support
Remote I/O station points setting
1
0-point setting to the reserved station
1
: Supported : Not supported
1: This function is newly provided to the CC-Link Ver.2 board in addition to the CC-Link Ver.1 board functions.
2: Separation is a condition that link data with double words (32 bits), such as the current value of the positioning module,
are separated to new data and old data in units of one word (16 bits) due to the refresh timing of cyclic transmission.