Mitsubishi Electric Q80BD-J61BT11N, Руководство пользователя

Страница: 112 / 362

5 - 4 5 - 4
MELSEC
5 PROCEDURE BEFORE STARTING THE DATA LINK
5.3 Installation
This section explains the handling precautions and installation environment of the CC-
Link Ver.2 board.
5.3.1 Precautions on handling the CC-Link Ver.2 board
The following explains the handling precautions of the CC-Link Ver.2 board:
CAUTION

Do not directly touch the conductive area or electronic components of the board.
Doing so may cause malfunction or failure in the board.

Always make sure to touch the grounded metal to discharge the electricity
charged in the body, etc., before touching the board.
Failure to do so may cause a failure or malfunctions of the board.

While handling the board, be sure to keep it free of static electricity.
Static electric charges may damage the board or result in malfunction.

Be careful not to let foreign objects such as swarf or wire chips get inside the
personal computer.
They may cause fires, failure or malfunction.

Do not drop the board and the terminal block or subject it to any excessive shock.
It may damage the board and the terminal block or result in malfunction.

Do not disassemble or modify board.
Doing so could cause failure, malfunction, injury or fire.

When disposing of this product, treat it as industrial waste.
5.3.2 Installation environment
Refer to the instruction manual provided with the personal computer for information on
how to install the personal computer in which the CC-Link Ver.2 board has been
mounted.
CAUTION

Use the board in an environment that meets the general specifications contained
in this user's manual.
Using this board in an environment outside the range of the general specifications
may cause electric shock, fire, malfunction, and damage to or deterioration of the
product.

Always ground the SLD terminal of the board and the personal computer to the
protective ground conductor.
Not doing so can cause a malfunction.