manualshive.com logo in svg

Microchip Technology GridTime 3000, Руководство по установке

Поделиться
Скачать
Microchip Technology GridTime 3000 Скачать руководство пользователя страница 83

This will make the current port you are configuring a PRP LAN A port. All PTP traffic coming from this port will
be duplicated on the port you select as the PRP LAN B port.

3.

Select PRP LAN B Port

To configure a port to be the PRP LAN B port, choose the port's name from the PRP PORT PAIR drop down.

Tip: 

Although the GridTime 3000 allows any pair of ports to be configured as PRP LAN A and PRP LAN
B, this is not recommended by Microchip Technology or by IEC-62439-3:2016. PRP LAN A should
be either immediately above PRP LAN B, or directly to the left of PRP LAN B.

Note: 

 Once you have selected a port as the PRP LAN B port, no configuration is required on the PRP LAN

B port you have selected. All settings you have configured on the PRP LAN A port will automatically be used
on the PRP LAN B port, and all previously configured settings on the PRP LAN B port will be ignored, although
they are still accessible and modifiable.

Note: 

The PRP LAN B port will be marked with a warning as shown.

 

Provisioning

©

 2022 Microchip Technology Inc.

and its subsidiaries

 Manual

DS00004572A-page 83

Содержание GridTime 3000















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды