manualshive.com logo in svg

Microchip Technology GridTime 3000, Руководство по установке

Поделиться
Скачать
Microchip Technology GridTime 3000 Скачать руководство пользователя страница 252

13. 

Appendix B: Third Party Software Licenses

This appendix provides the third party software licenses used by the GridTime 3000.

This product contains licensed third party software, including software available under the GPL licensing scheme.
You can obtain these licenses and the open-source soft-ware by contacting Microchip Technical support at the
following numbers:

• Worldwide (Main Number): 1-408-428-7907
• USA, Canada, Latin America including Caribbean, Pacific Rim including Asia, Australia and New Zealand:

1-408-428-7907

• USA toll-free: 1-888-367-7966
• Europe, Middle East & Africa: 49 700 32886435

An administrative fee may be charged to obtain the source code.By using the GridTime 3000, the user agrees to the
terms of these licenses.

The licenses can be obtained using the following URL:

•

www.gnu.org/licenses

•

www.opensource.org/licenses/BSD-3-Clause

•

www.opensource.org/licenses/BSD-2-Clause

•

www.opensource.org/licenses/MIT

•

www.spdx.org/licenses/bzip2-1.0.6.html

•

spdx.org/licenses/ICU.html

•

www.openssl.org/source/license.html

•

www.openldap.org/software/release/license.html

•

www.opensource.org/licenses/Artistic-1.0

•

www.opensource.org/licenses/Artistic-2.0

•

creativecommons.org/publicdomain/mark/1.0/

•

www.zlib.net/zlib_license.html

13.1 

Third Party Software

The following is a list of third-party software applications provided with the GridTime 3000

• PACKAGE NAME: base-files

PACKAGE VERSION: 3.0.14

RECIPE NAME: base-files

LICENSE: GPLv2

• PACKAGE NAME: base-passwd

PACKAGE VERSION: 3.5.29

RECIPE NAME: base-passwd

LICENSE: GPLv2+

• PACKAGE NAME: bash

PACKAGE VERSION: 4.4.18

RECIPE NAME: bash

LICENSE: GPLv3+

• PACKAGE NAME: busybox

PACKAGE VERSION: 1.30.1

RECIPE NAME: busybox

 

Appendix B: Third Party Software L...

©

 2022 Microchip Technology Inc.

and its subsidiaries

 Manual

DS00004572A-page 252

Содержание GridTime 3000















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды