7.
Enable or Disable SSM Bits
Enable or disable SSM bits in the output signal using the 'SSM BITS' radio buttons.
8.
Select Override SSM Behaviour
Select the appropriate override SSM value from the 'OVERRIDE SSM' dropdown.
9.
Save Settings
Click the 'SAVE' button to write the settings to the GridTime 3000.
A 'Saved!' notification will appear in the bottom right corner of the page indicating that the settings have
successfully been written to the GridTime 3000.
9.8
Provisioning the Pulse Ports
This section describes how to provision the GridTime 3000's pulse ports. The pulse ports include the BNC ports, the
ST Fiber ports, and the HV MOSFET Port.
9.8.1
Provisioning Standard Pulse Outputs
This section describes how to provision pulse ports with standard pulse outputs. The standard pulse outputs can be
configured on any of the GridTime 3000 pulse ports. Standard ouputs include:
• Unmodulated IRIG-B
• Modified Manchester Modulated IRIG-B
• Simulated DCF77 Receiver Signal
• Programmable Pulses
See
2.4. Time and Frequency Signals
for the complete specifications of all the standard pulse outputs.
Provisioning
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 160
