manualshive.com logo in svg

Microchip Technology GridTime 3000, Руководство по установке

Поделиться
Скачать
Microchip Technology GridTime 3000 Скачать руководство пользователя страница 198

This will make the new subscription settings appear.

3.

Enter Subscription's Destination IP Address

Enter the IP address of the SNMP client subscribing to GridTime 3000 notifications.

4.

Enter Subscription's User Name

When the SNMP version selected is SNMPv2, this field will be used as the security key. The key can consist of
any character combination, up to 32 characters maximum length.

If the SNMP version selected is SNMPv3, and the username of a user set up in the 'SNMP Users' window is
entered, then the user authentication settings will be applied. See 

9.12.3.  Provisioning SNMP Users

.

If SNMPv3 is being used and the username doesn't map to an SNMP user, SNMP notifications will be
unauthenticated and unencrypted.

Enter the user name for the SNMP subscriber.

5.

Select SNMP Version Used by Subscription

Select the SNMP version to be used by the SNMP subscriber from SNMPv1, SNMPv2c, and SNMPv3.

6.

Repeat Steps 2-5 for Each Additional Subscriber

 

Provisioning

©

 2022 Microchip Technology Inc.

and its subsidiaries

 Manual

DS00004572A-page 198

Содержание GridTime 3000















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды