Select whether the signal will be inverted or normal from the radio buttons below the pulse output drop down. It
will be set to 'NORMAL' by default.
5.
Include or Exclude Binary Seconds of Day Data
Select whether binary seconds of day data will be included in the output with the 'BINARY SECONDS OF DAY
DATA' radio buttons. Binary seconds of day data will be set to 'INCLUDE' by default.
Note:
Microchip recommends including binary seconds of day data in case it is required by the end device.
6.
UTC or Local Time
Select whether the output will use a UTC or Local Time format using the 'UTC OR LOCAL TIME' radio buttons.
'LOCAL TIME' will be selected by default.
7.
Select Extensions
Select what extensions will be included in the control field of the output IRIG-B signal. C37.118.1 extensions
will be selected by default.
Note:
Microchip recommends using C37.118.1 extensions here as they are widely supported by end devices
and contain useful information such as pending leap seconds and daylight savings jumps.
8.
Select Even or Odd Parity
Select whether the signal will use odd or even parity from the 'PARITY' radio buttons. The 'PARITY' is set to
'EVEN' by default.
9.
Select Leap Second Behavior
Choose the leap second behavior from the following options:
Provisioning
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 162
