Figure 9-1. Clock Management Tool - General Clock Tab
1. Click General
Clock Icon
2. Click General
Clock Setting Bar
3. General Clock Settings
Tab Will Appear
2.
Setup Local Time Zone
Using the offset hours from UTC, offset minutes from UTC and the standard time zone name settings,
configure your local standard time offset from UTC in hours and minutes, and the name of your local timezone.
The offset in hours can be configured in the range of -12 to 14 hours, and the offset in minutes can be
configured in the range of 0 to 59 minutes. The standard timezone name can be configured as any ASCII
string, but only the first five characters will be displayed on the LCD and used in messages.
Note:
This step is for configuring the standard timezone offsets only. If your region observes daylight savings,
daylight savings offsets are configured in step 3.
Important:
Regional time zone UTC offsets and daylight savings offsets are not automatically detected by the
GridTime 3000, and must be manually entered by a user. Updates to the UTC offset or daylight
savings in the region of use must also be actively monitored and maintained by a user.
Visit
www.timeanddate.com/time/change/
for up to date information on regional UTC offsets and
daylight savings offsets.
3.
Setup Daylight Savings
Provisioning
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 61
