Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 110 / 190

Section 4 - Main Menu
90-8M8022154 APRIL 2008 Page 103
NOTE: Setting a higher percentage means that the tab must move farther to activate the
pop‑up.
Example:
Setting the TAB DELTA % parameter at 2% means that either tab moves
2% in one second for the tab pop‑up to appear for the length of time set in the "POPUP
TIME" field.
If you restrict tab movement to a percentage lower than this parameter, the tab pop‑up will
not appear. This way, you can perform fine tab adjustments by pressing the tab control
button for short periods without activating the tab pop‑up.
Setting the TAB DELTA % to 9.9 will disable the Tab popup while allowing the Trim popup
to still activate.
8. Press the down arrow on the arrow trackpad to select the "POPUP TYPE" field.
9. Press the left or right arrow on the arrow trackpad to toggle between "STANDARD" or
"HIGH RES".
IMPORTANT: Standard will show a range from 0 to 25 for the position of the trim or tab
pop‑up window. High resolution will show a range of 0 to 10 that offers a closer view of the
trim position. Standard resolution must be used when trailering the vessel in order to view
the full propulsion unit trim position.
33092
STANDARD
HIGH RESOLUTION
10. Once you have finished selecting your trim/tab settings, press the check button to save
the session.
NOTE: Upon completing any change/customization to VesselView a blue pop‑up message
will appear as a reminder to save your session. Refer to
Section 1 - Saving Settings
. To
save time, it is recommended that all session changes be saved before holding
X
button
while keying ALL engines off.