Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 27 / 190

Section 2 - Initial Setup and Calibration
Page 20 90-8M8022154 APRIL 2008
2. Insert a USB memory stick into the USB port on the back of the VesselView unit.
c
a
b
27329
a - Ethernet port (for future option)
b - USB port
c - USB memory stick
IMPORTANT: Do not remove the USB memory stick until the import process is complete.
3. When the memory stick is detected, the "IMPORT CONFIG" screen will display
"MEMORY STICK READY".
IMPORTANT: If you attempt to load a configuration setting that was not saved to the USB
memory stick, the import of the data file will not be successful; a yellow pop‑up message
will appear stating "IMPORT UNSUCCESSFUL". If you can recall the configuration setting
that was not saved, select "SKIP" for that particular configuration setting. That particular
configuration setting will need to be setup and calibrated accordingly. Refer to Section 4 ‑
Calibrate.
To avoid this error, it is practical to save all configuration settings to the USB memory stick
(leave all fields read "EXPORT"). This will resolve any doubt, when loading ("IMPORT")
configuration settings.
IMPORT UNSUCCESSFUL
Import was unable to find
all the files for the selected
import task.
PRESS (X) TO CONTINUE
!
27302
Import unsuccessful pop‑up message