Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 132 / 190

Section 5 - Propulsion Menu
90-8M8022154 APRIL 2008 Page 125
Viewing Trim/Tabs
The trim/tabs screen displays the current speed and RPM, as well as the distance per
revolution (in this example: Inches/Rev), trim position, and tab position for up to three
engines (triple setup maximum) and three tabs (a starboard and port setup or just a center
tab setup).
33272
b
a
e
d
g
f
i h
c
a - Port engine RPM
b - Starboard engine RPM
c - Vessel speed (This field will
change to RPM in a triple engine
setup)
d - Port engine distance per
revolution
e - Starboard engine distance per
revolution
f - Port trim position
g - Starboard trim position
h - Port tab position
i - Starboard tab position
• The "P", "SC", and "S" bubbles will change in color when the engine key switch is turned
to the run position. They also will change in color when the engine's RPM's are
synchronized.
• RPM is displayed for all engines.
• Speed is displayed using pitot, paddle, or GPS sensor information.
• For a triple engine setup, RPM for the center engine will be displayed in the center
speed position.
• Inches per revolution is determined using the vessel speed and the RPM of that
particular engine.
• Displays the trim position for all engines.
• Displays the position of all tabs installed on the vessel.
Viewing Delta Pressure
The delta pressure screen displays the current speed and RPM, as well as the fuel, boost,
and delta pressures for up to three engines (triple setup maximum).