Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 20 / 190

Section 1 - Getting Started
90-8M8022154 APRIL 2008 Page 13
1. Upon entering the "CLOCK/BRIGHTNESS" screen, the "HOURS (0‑23)" field will be
highlighted in blue.
2. Press the down arrow on the arrow trackpad to proceed to the "BRIGHTNESS" field.
3. Press the left or right arrow on the arrow trackpad to adjust screen brightness. The right
arrow increases brightness and the left arrow decreases brightness.
4. Once you have selected the preferred brightness setting, press the check button to
save the session.
NOTE: Upon completing any change/customization to VesselView a blue pop‑up message
will appear as a reminder to save your session. Refer to
Section 1 - Saving Settings
. To
save time, it is recommended that all session changes be saved before holding
X
button
while keying ALL engines off.
Status Bar
VesselView displays important information in the status bar at the top of each screen. The
status bar displays up to four different icons and messages. Notices of conditions that may
need attention (such as warnings, fuel level alerts, and faults) appear as an icon on the left
side of the status bar with a short description of the fault. The fault text will temporarily
replace the status bar icons until the fault is cleared. If more than one fault has occurred,
the faults will appear one after the other in the sequence they occurred. To clear a fault
message from the status bar, after a fault has been corrected, press the
X
button. Refer to
Section 4 - Alarms
for more information about alarms and fault codes. Refer to
Section
1 - Using Dialog Boxes and Pop-Up Windows
to learn how to view the "ALARM
DETAILS" pop‑up window.
33069