Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 104 / 190

Section 4 - Main Menu
90-8M8022154 APRIL 2008 Page 97
Offsets
The "OFFSETS" screen enables you to change the offsets in order to compensate for
inaccuracies in depth, tank, and sea temperature. Menu path: "Main" > "Settings" >
"Offsets". Press the check button to open the "OFFSETS" screen.
b
c
a
27318
a - Depth offset
b - Tank offset
c - Sea temp offset
1. Upon entering the "OFFSETS" screen, the "DEPTH OFFSET" field will be highlighted
in blue.
2. The depth offset default setting is 0.0 ft. Press the left or right arrow on the arrow
trackpad to add or subtract depth offset. To set an offset below the transducer, subtract
from the depth offset. To set an offset above the transducer, add to the depth offset.
32883
b
c
d
a
a - Depth transducer
b - To set an offset below the transducer, subtract the depth offset.
c - No offset. Distance from depth transducer to bottom.
d - To set an offset above the transducer, add to the depth offset.
3. After you have made the necessary changes to the depth offset, press the down arrow
on the arrow trackpad to proceed to the "TANK OFFSET" field.
4. The tank offset default setting is 0.0%. This adjustment is used to adjust for move the
entire tank calibration up to compensate for vessel attitude. It is recommended to leave
this setting at "0.0% and calibrate the tank according to the
Manual Method
shown in
Section 4 - Tank Calibration
.