Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 41 / 190

Section 2 - Initial Setup and Calibration
Page 34 90-8M8022154 APRIL 2008
i. Press the check button to select the tank to be calibrated.
32784
ii. On the "TANK CALIBRATION" screen, press the up or down arrow on the
arrow trackpad to highlight the "FILL TANK" calibration method and press the
check button.
32218
IMPORTANT: Ensure the tank is empty.
iii. Press the check button to confirm that the tank is empty or the
X
button to go
back one step.
iv. Following the direction on the screen, fill the tank to 25% of its capacity. Press
the check button to confirm or the
X
button to go back one step.
v. Following the direction on the screen, fill the tank to 50% of its capacity. Press
the check button to confirm or the
X
button to go back one step.
vi. Following the direction on the screen, fill the tank to 75% of its capacity. Press
the check button to confirm or the
X
button to go back one step.