Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 120 / 190

Section 4 - Main Menu
90-8M8022154 APRIL 2008 Page 113
The "ACTIVE ALARMS" screen will display alarms for up to four engines. All alarms will
be listed and numbered. Each numbered alarm will list which engine is activating the fault.
Each fault will be identified as "STBD", "PORT", "STBDCNTR", or "PORTCNTR"
depending on the number of engines. Follow the chart listed to identify the fault with the
correct engine.
Single Engine Dual Engines Triple Engines Quad Engines
"STBD"
Starboard Starboard Starboard Starboard
"PORT"
N/A Port Port Port
"STBDCNTR"
N/A N/A Starboard center Starboard center
"PORTCNTR"
N/A N/A N/A Port center
Below the engine identification there will be short text to describe the fault. Details of the
fault can be viewed in the "ALARM DETAILS" screen.
VIEWING ALARM DETAILS
1. To the left of the first alarm listed in the "ALARM DETAILS" screen there will be an
arrow cursor. Press the up or down arrow on the arrow trackpad to highlight an alarm.
2. Press the check button to view the respective alarm history in the "ALARM DETAILS"
screen.
a
b
c
27321
a - Fault short text
b - Fault long text
c - Action text
The "ALARM DETAILS" screen will list the details of the alarm.
• The short text defining the alarm will be listed at the top of the screen.
• The long text, listed below the short text, further clarifies the alarm.
• The action text, listed at the bottom of the screen, instructs the operator on how to
handle the alarm.
Refer to your vessel engine manual for a complete list of faults.
Alarm History
The "ALARM HISTORY" screen will display alarm history for up to four engines. Menu path:
"Main" > "Alarms" > "Alarm History". Press the check button to open the "ALARM
HISTORY" screen.