Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 140 / 190

Section 6 - Vessel Menu
90-8M8022154 APRIL 2008 Page 133
Viewing Performance and Fuel
The performance and fuel screen displays basic operating information for up to four
engines. RPM will only be displayed for a maximum of three engines (triple engine setup).
26885
a
b
c
d
e
f
a - Port engine RPM
b - Starboard engine RPM
c - Vessel speed
d - Estimated range
e - Total fuel used
f - Fuel tank status
• RPM is displayed for up to three engines.
• Speed is displayed using pitot, paddle, or GPS sensor information.
• Estimated range is determined using the total fuel flow for all engines and the current
rate at which the engines are consuming fuel.
• Total fuel used is the amount of fuel used from all fuel tanks and all engines.
• The fuel tank status icons display the amount and type of fuel in each tank, as well as
the location of each tank.
• The fuel tank color will change from green to red if the tank is below the critical level.
Refer to
Section 4 - Tank Calibration
for critical fuel level adjustment.