Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 92 / 190

Section 4 - Main Menu
90-8M8022154 APRIL 2008 Page 85
NOTE: Upon completing any change/customization to VesselView a blue pop‑up message
will appear as a reminder to save your session. Refer to
Section 1 - Saving Settings
. To
save time, it is recommended that all session changes be saved before holding
X
button
while keying ALL engines off.
Load Configuration
The "LOAD CONFIGURATION" screen is used to import selected configuration settings
from a USB memory stick. To load configurations, press the menu button until the "Main"
menu appears, then "Calibrate" > "Load Configs". Press the check button to open the
"LOAD CONFIGURATION" screen.
IMPORTANT: The VesselView unit will recognize USB memory sticks of version 1.1 or a
USB memory stick of version 2.0 that is stated to be backwards compatible to version 1.1.
The VesselView unit will not recognize memory sticks that are only version 2.0 compatible.
IMPORTANT: Configuration settings saved to a USB memory stick are compiled into one
data file. Only one file can exist in the root of the USB memory stick. VesselView will not
recognize multiple import files.
1. Once in the "LOAD CONFIGURATION" screen, a blue pop‑up message will appear
asking you to "PLEASE INSERT USB MEMORY STICK".
LOAD CONFIGURATION
TANK CONFIG
TRIM CONFIG
DEPTH CONFIGS
UNITS/APP PREF
STEERING
IMPORT
IMPORT
EXPORT
IMPORT
IMPORT
PLEASE INSERT USB MEMORY STICK
27232
2. Insert a USB memory stick into the USB port on the back of the VesselView unit. Refer
to
Section 2 - Setup Wizard
for an illustration showing the USB port.
IMPORTANT: Do not remove the USB memory stick until the import process is complete.
3. When the memory stick is detected, the blue pop‑up message will disappear; this may
take several seconds.
4. The "LOAD CONFIGURATION" screen shows the configuration settings with the
"TANK CONFIG" field highlighted in blue. Press the left or right arrow on the arrow
trackpad to select either "IMPORT" or "SKIP".