Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 83 / 190

Section 4 - Main Menu
Page 76 90-8M8022154 APRIL 2008
3. Press the check button to confirm that you have trimmed all engines or drives to the
full down position, or press the
X
button to go back one step. This sets the "0.0" trim
setting.
4. When the "TRIM ENGINE" screen prompts you to trim "UP", trim all engines or drives
up, but not to the trailer position. This will display a "10.0" trim setting.
27206
5. Press the check button to confirm that you have trimmed all engines or drives up to the
"10.0" position, or press the
X
button to go back one step.
6. When the "TRIM ENGINE" screen prompts you to trim to "MAX TRAILER", trim all
engines or drives all the way up to the trailer position. This will display a "25.0" trim
setting.
27207
7. Press the check button to confirm that you have trimmed all engines or drives to the
trailer position or press the
X
button to go back one step. VesselView will show that it
is "Working".
NOTE: Upon completing any change/customization to VesselView a blue pop‑up message
will appear as a reminder to save your session. Refer to
Section 1 - Saving Settings
. To
save time, it is recommended that all session changes be saved before holding
X
button
while keying ALL engines off.