Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 103 / 190

Section 4 - Main Menu
Page 96 90-8M8022154 APRIL 2008
6. Press the left or right arrow on the arrow trackpad to select distance units of "Mil", "KM",
or "NM".
7. Press the down arrow on the arrow trackpad to proceed to the "TEMPERATURE" field.
8. Press the left or right arrow on the arrow trackpad to select temperature units of "F" or
"C".
9. Press the down arrow on the arrow trackpad to proceed to the "PRESSURE" field.
10. Press the left or right arrow on the arrow trackpad to select pressure units of "PSI",
"BAR", or "KPA".
11. Once you have finished selecting your units of measure, press the check button to save
the session.
NOTE: Upon completing any change/customization to VesselView a blue pop‑up message
will appear as a reminder to save your session. Refer to
Section 1 - Saving Settings
. To
save time, it is recommended that all session changes be saved before holding
X
button
while keying ALL engines off.
Units 2
The "Units 2" menu option is a continuation of the "UNITS" screen. "Units 2" enables you
to set units of measure for volume and fuel flow. Menu path: "Main" > "Settings" > "Units
2". Press the check button to open the "UNITS" screen.
a
b
27319
a - Volume
b - Fuel Flow
1. Upon entering the "UNITS" screen, the "VOLUME" field will be highlighted in blue.
Press the left or right arrow on the arrow trackpad to select volume units of "GAL", "LIT",
or "IGL".
2. Press the down arrow on the arrow trackpad to proceed to the "FUEL FLOW" field.
3. Press the left or right arrow on the arrow trackpad to select fuel flow units of "GPH",
"LPH", "MPG", "KPL", or "NMPG".
4. Once you have finished selecting your units of measure, press the check button to save
the session.
NOTE: Upon completing any change/customization to VesselView a blue pop‑up message
will appear as a reminder to save your session. Refer to
Section 1 - Saving Settings
. To
save time, it is recommended that all session changes be saved before holding
X
button
while keying ALL engines off.