Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 68 / 190

Section 4 - Main Menu
90-8M8022154 APRIL 2008 Page 61
• "WASTE"
32781
3. Press the down arrow to proceed to the next tank.
4. Perform steps 2 and 3 for all remaining tanks on the vessel.
5. Confirm your selections by pressing the check button. The next screen will appear
asking for the known capacities of each tank.
NOTE: Tank types have now been confirmed.
6. Press the left or right arrow on the arrow trackpad until the tank
capacity
is shown for
that particular tank.
NOTE: Pressing and holding an arrow causes the numeric increments to speed up. Left
arrow causes the number to decrease; right arrow causes the number to increase.
NOTE: The default unit for measuring tank capacity is U.S. gallons. To choose a different
unit of measurement, refer to
Section 4 - Units 2
.
32782
7. Press the down arrow to proceed to the next tank.
8. Perform steps 6 and 7 for all remaining tanks on the vessel.
9. Confirm your selections by pressing the check button. The next screen will appear
asking for the location of each tank.
NOTE: Tank capacities have now been confirmed.
10. Press the left or right arrow on the arrow trackpad until the tank
location
label that you
would like is shown for that particular tank.