Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 130 / 190

Section 5 - Propulsion Menu
90-8M8022154 APRIL 2008 Page 123
• The "P", "SC", and "S" bubbles will change in color when the engine key switch is turned
to the run position. They also will change in color when the engine's RPM's are
synchronized.
• RPM is displayed for all engines.
• Speed is displayed using pitot, paddle, or GPS sensor information.
• For a triple engine setup, RPM for the center engine will be displayed in the center
speed position.
• Inches per revolution is determined using the vessel speed and the RPM of that
particular engine.
• Displays the trim position for all engines.
• Fuel economy is determined using the fuel flow for all engines and the speed of the
vessel.
Viewing Oil Pressure
The oil pressure screen displays the current speed and RPM, as well as the coolant
pressure, coolant temperature, and the oil pressure for up to three engines (triple setup
maximum).
NOTE: This screen will not appear for a vessel setup with either 2‑stroke or 4‑stroke gas
outboard engines. It will appear for the gas Verado engine.
33265
b
a
e
d
g
f
i h
c
a - Port engine RPM
b - Starboard engine RPM
c - Vessel speed (This field will
change to RPM in a triple engine
setup)
d - Port engine coolant pressure
e - Starboard engine coolant
pressure
f - Port engine coolant temperature
g - Starboard engine coolant
temperature
h - Port engine oil pressure
i - Starboard engine oil pressure
• The "P", "SC", and "S" bubbles will change in color when the engine key switch is turned
to the run position. They also will change in color when the engine's RPM's are
synchronized.
• RPM is displayed for all engines.
• Speed is displayed using pitot, paddle, or GPS sensor information.