Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 84 / 190

Section 4 - Main Menu
90-8M8022154 APRIL 2008 Page 77
MANUAL METHOD THEORY
To compensate for differences in trim position sensors, select the positions (0 = Down, 10
= Up, and 25 = Max Trailer) and adjust the actual % value to match the current actual %
for that known trim position.
MANUAL METHOD PROCEDURE
1. On the "TRIM CALIBRATION" screen, press the down arrow on the arrow trackpad to
highlight the "MANUAL" method and press the check button.
32743
2. Press the left or right arrow on the arrow trackpad to scroll through the available
locations to adjust. You may select any of the following depending on the number of
engines:
a.
"NONE"
b. "STBD" (single will only show the STBD position)
c. "PORT"
d. "CENTER" (triples only)
e. "STBDCNTR" (quads only)
f. "PORTCNTR" (quads only)
32744
3. Confirm your selection by pressing the check button.
4. Trim the respective engine or drive into the
down
position.