Mercury Racing VesselView, Инструкция по установке, калибровке и эксплуатации

Страница: 115 / 190

Section 4 - Main Menu
Page 108 90-8M8022154 APRIL 2008
IMPORTANT: The screens that are not checked (turned off) will not appear in their
respective category menu and will not be available when you select the left or right arrow
on the arrow trackpad.
IMPORTANT: If all screens are turned off, the following message will appear requiring you
to turn screens back on. VesselView will not function until at least one screen is turned on.
When the category button is pressed, and no screens are turned on in that category, a
similar pop‑up message will appear.
33336
1. Upon entering the categories "PAGES ON/OFF" screen, the first item in the list will be
highlighted in blue.
a.
Press the up or down arrow on the arrow trackpad to highlight a check box next
to a screen.
b. Press the left or right arrow on the arrow trackpad to turn that particular screen on
(checked) or off (not checked).
c. Press the check button to close the category screen or the
X
button to cancel and
not save your session changes.
2. Press the menu button to enter back into the "Pages On/Off" menu.
3. Press the down or up arrow on the arrow trackpad to select the next category of
screens.
4. Perform steps 1–3 for each category of screens.
IMPORTANT: If an attempt to open a new chapter after ALL pages have been turned off,
a blue pop‑up box will appear stating that all pages have been turned off. Dismiss this
pop‑up message by pressing the X button prior to entering the "Settings 2 ‑ Pages ON/
OFF" menu option to turn pages back on.
NOTE: Upon completing any change/customization to VesselView a blue pop‑up message
will appear as a reminder to save your session. Refer to
Section 1 - Saving Settings
. To
save time, it is recommended that all session changes be saved before holding
X
button
while keying ALL engines off.