MASCAR Diavel 630, Руководство по эксплуатации и обслуживанию

Страница: 68 / 72

Roundbaler DIAVEL 630
– DIAVEL 630 CUT
USE AND MAINTENANCE MANUAL - 68 -
WARNING
After connecting the brakes with the tractor,
you must wait until the system reaches the
operating pressure before starting the baler.
Fig. 48 - Pneumatic braking system
When the system is disconnected from the tractor,
the round baler is automatically braked, in order to
move the round baler without connecting to the
tractor, you must manually operate the release
valve (3), placed on the front right side of the
machine.
The brake pressure tire must be contained
between the values:
minP = 6.5 bar
maxP = 8.5 bar
If the system pressure drops below 2.5 bar, the
automatic emergency braking intervenes, to
unlock the brakes is necessary to bring the
pressure to the operating values.
When the pressure falls below 2.5 bar the release
valve is not sufficient to release the brakes
WARNING
The a utomatic braking that intervenes when
the system is disconnected, does not replace
the parking brake which needs to be engaged
in parking position
CAUTION
It is necessary to periodically check the
condition of the pneumatic braking system, in
case of air loss contact a service center to fix
it.
Periodically discharge any condensation in
the pneumatic braking system by pressing the
valve located at the bottom of the tank
8.4 SUPPLY CABLE FROM THE
BATTERY
If the tractor is not equipped with a suitable outlet
(Sec. 5.2.6), you can request the following cable
to be connected directly to the battery:
- Connection cable DIN 9680 (cod. 51002124) -
Battery tractor.