Roundbaler DIAVEL 630
– DIAVEL 630 CUT
USE AND MAINTENANCE MANUAL
- 43 -
Fig. 31
– Monitor M630
5.5 MONITOR M630
WARNING
Before starting up the baler, make sure that all
around the machine there are no people or
animals. Make sure you can still have a great
visibility.
The working phases of the machine are monitored
and controlled by the control system.
The control system of the baler consists of a
control unit on the machine and a terminal with
which the user is interfaced.
The terminal should be installed inside the cab of
the tractor in a place of easy access and visibility.
The figure 31 shows the terminal with various
buttons, followed by a brief description of
each.
1)
Power ON/OFF button:
To turn on the
panel just press once, to turn off keep it
pressed for 1 second.
2)
ESC button:
It exits from a command or
the change of a parameter without saving
the changes made.
3)
F1 button:
Select the control of the drop
bottom or of the knives (CUT version); to
switch on the selected control press
Enter.
4)
MENU button:
it is used to access the
counter menu or the main menu.
5)
Navigation key:
it allows to move the
selection up between the various areas of
the display.
6)
ENTER button:
depending on the icon
displayed in the lower right, it allows you
to perform the following actions:
a.
Start:
it starts the selected
binding
b.
Modify:
it modifies the selected
parameter
c.
OK:
it allows the activation of the
selected command.
Содержание Diavel 630
