MASCAR Diavel 630, Руководство по эксплуатации и обслуживанию

Страница: 6 / 72

Roundbaler DIAVEL 630
– DIAVEL 630 CUT
USE AND MAINTENANCE MANUAL - 6 -

In the event the instructions featured in this
manual have not been followed.

Neither shall the warranty cover any damage
resulting from negligence, carelessness, bad
operation or improper use of the machine.
WARNING
The removal of the safety devices supplied
with the machine shall automatically cause the
warranty to become void and relieve the
Manufacturer of any responsibility.
In addition, the warranty shall become void in
the event non-original spare parts are used.
The machine, or parts of it, must be returned
carriage free, even when under warranty.
1.3 MARKINGS
Each machine features an identification plate,
featuring the following datas:

«CE» marking

Manufacturer Name and Address;

Machine Model;

Serial Number;

Year of manufacture;

MODEL YEAR: Year of the model

Net weight in kg

Maximum loading capacity in kg.
Data showed on the machine identification plate
have to be quoted at page 4 of this manual and
they have to be always mentioned for eventual
requests for spare parts or need of assistance.
The machine is standards equipped with:

Machine use and maintenance manual

Declaration of «CE» conformity
1.4 DESCRIPTION AND USE OF THE
MACHINE
The round baler «MONSTER 770, MONSTER-
CUT 770» manufactured by MASCAR, is a
machine marked «CE» in conformity with the rules
indicated by the 2006/42/CE directive, as
described in the conformity declaration each
machine is provided with.
The machine is substantially made by a bearing
metal
structure, which bears the various
machinery suitable to the collection of agricultural
products and their pressing in bales of cylindrical
shape. These mechanisms are contained by a
series of steel panels and plastic materials. All this
is supported by an axis with rubber wheels for
transport and equipped by an height-adjustable
drawbar for mounting and towing to the tractor.
The mechanism forecasted for product collection
is called collector or pick-up.
The mechanism to direct the product into the bale
chamber is called rotor.
The area under the rotor can move to avoid choke
is called lowerable drawer
Rotor and lowerable drawer can be made and
equipped with knives to cut the entering products
(version cut).
The set of rollers within the chamber ensures the
creation of the round bale
By the system of twine or net binding, the bale
maintains its own shape once unloaded from the
machine.
The unload of the bale is made through the rear
door of the machine.
The connection to the electrical system of the
baler is made by:

A 3-ways power outlet (12V, 30A) which
powers the control unit

A 7-ways power outlet which powers the light
system.
The oleo dynamic system of the baler is driven by
two hydraulic distributors at double effect installed
on the tractor, connected to the machine by four
quick joints and four flexible tubes. By operating
just on the hydraulic distributors of the trac
tor, it’s
possible to operate the following functions of the
round baler:

Lift or lower the pick-up

Open and close the rear door