MASCAR Diavel 630, Руководство по эксплуатации и обслуживанию

Страница: 48 / 72

Roundbaler DIAVEL 630
– DIAVEL 630 CUT
USE AND MAINTENANCE MANUAL - 48 -
In this Menu there are the following items:

Average bale/Hour

Number of bale net bound

Number of bale twine bound

Number of bale using the cut device (cut
version only)
To set to zero one of the 3 counters, it is
necessary to select the counter desired by the
arrow keys and enter into the modification
modality by the Enter key.
Select the F1 key to set to zero the counter and
select Enter to confirm or Esc to cancel the
modification.
By the Esc ke
y you’ll get back to the Counter
Menu.
From the Counter Menu, entering again the Menu
key, you’ll get to the Main Menu:
Fig. 35
– Main menu
The menu items are, in order:

Net binding delay time: 0-5 s

Twine binding delay time: 0-5 s

Volume

Brightness

Settings Menu
Using the arrow keys you can select the various
parameters. Once selected, in order to change
them, press the Enter key, then increase or
decrease the value using the arrow keys. To
confirm the changed value, press the Enter key
again or press the Esc key to exit without
changing the value.
By selecting Settings menu and pressing the
Enter key the submenu opens.
CAUTION
The Settings menu is reserved to qualified
staff who have fully understood the operation
of the devices and the control system of the
baler.
The Settings menu items are, in order:

Net binding installed (Yes/No)

Twine binding installed (Yes/No)

Cutting device installed (Yes/No)

Inputs diagnostics

Outputs diagnostics
Fig. 36
– Settings menu
On the right side it will appear the functions of the
buttons and the software version installed on the
terminal (T) and on the control unit (E)
Selecting the item Inputs and pressing Enter is
possible to enter the Inputs Diagnostics Menu.
This menu allows the view of the status of the
sensors installed on the machine.
On the left column is possible to visualize:

Status pressure switch P1

Status pressure switch of the knives P<40
bar

Status drop bottom sensor

Status knives sensor (left side)

Status left twine sensor
On the right column is possible to visualize:

Status pressure switch P2

Status rear door sensor

Status cutting net sensor

Status knives sensor (right side)

Status right twine sensor