MASCAR Diavel 630, Руководство по эксплуатации и обслуживанию

Страница: 19 / 72

Roundbaler DIAVEL 630
– DIAVEL 630 CUT
USE AND MAINTENANCE MANUAL - 19 -
Dispose of hazardous waste by specific licensed
companies making sure they release receipt
of the occurred waste disposal.
Dispose eventual packing residuals of the
machine in the appropriate containers for
diversified waste.
2.7 FIRE SAFETY
WARNING
Dry materials that can be worked by the round
baler are themselves a product of high fire
risk. Pay special attention to the hereunder
indications in order to avoid fire hazard:

Every 8 hours of work, carefully clean the
round baler paying particular attention to the
product eventually wrapped at the ends of
rolls or to the remains of net and/or twine
binding.

Perform correct regular maintenance

Perform periodic lubrication and greasing of
chains and bearings.

Periodically check the condition of bearings
and bushings.

In case some overheating are noticed,
immediately stop work, wait for cooling of the
parts and verify the reasons of the
overheating. Eventually contact the closest
service center.

It is strictly forbidden to smoke or keep
cigarettes or fire burning near the machine

Before starting any soldering operation,
clean well the machine from any flammable
material (collections residuals, fuel oils).