MASCAR Diavel 630, Руководство по эксплуатации и обслуживанию

Страница: 14 / 72

Roundbaler DIAVEL 630
– DIAVEL 630 CUT
USE AND MAINTENANCE MANUAL - 14 -
2.2 SAFETY SIGNS (PICTOGRAMS)
The machine has been designed and
manufactured in compliance with every possible
safety standard to assure the safety of the
operator.
Nonetheless, there are still a number of residual
hazards involved in the use of the machine, i.e.
those hazards that it has not been possible to
eliminate completely due to the specific nature of
the work the machine is designed for and certain
operating conditions.
These potential hazards are marked on the
machine with stickers (pictograms) that provide a
summary indication of the various unsafe and
hazardous situations.
WARNING
Keep stickers clean and replace them
immediately should they start peeling off or be
damaged.
WARNING
All the safety signs positioned on one side of
the round baler and illustrated hereunder have
to be applied in exactly the same position on
the other side as well.
1)
Before starting to work, carefully read the
operating instructions.
2)
Before starting cleaning and maintenance
operations, stop the machine, remove the key
from the control panel and read the operating
instructions.
3)
DANGER. While the machine is working no one,
beside the operator, can get close to the machine
and the machine controls
4)
Crushing Hazard. Do not get close to the area
between the tractor and the round baler. Before
entering this area, turn off the engine, activate the
parking brake of the tractor and get sure of the
round baler stability.
5)
Crushing hazard/cutting of upper limbs. Do not
remove protections and do not get close to the
moving parts.