3 - Preventive Maintenance Procedure (EC2000)
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 46 of 356 (
D99875607-91
)
3.6
Service the Hopper Module
Follow these steps to service the hopper transport:
1)
Use the
MCP Commands
2.9 How to Use Maintenance Functions On the
) to move the hopper shuttle from the front to the rear of the device to verify the
movement is smooth and there is no belt slippage.
2)
Only if the hopper transport rods are dirty, wipe off the dirt with a soft, lint-free cloth.
3)
Check the hopper transport drive belt for signs of damage. If it is damaged, contact MagTek Support
Services for a replacement.
