5 - Removal and Re-installation
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 172 of 356 (
D99875607-91
)
8)
Push the lid cover toward the button to make sure the two hooks at the end near the button are locked
into place.
9)
Close the image printer.
10)
Perform any other service that requires the device to be powered down and open.
11)
Thoroughly clean EC2000 (see
D99875600 ExpressCard 2000 Installation and Operation
Manual
for details).
12)
Make sure the device is returned to its original installation location and physical configuration,
including installed consumables such as ribbons and card stock, security hardware, and so on.
13)
Re-connect the power cable, network cable, and any security hardware.
14)
Close EC2000’s top access door.
