3 - Preventive Maintenance Procedure (EC2000)
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 56 of 356 (
D99875607-91
)
11)
Move the hammer follower out of the way and add 2 drops of lubricant to the top and to the front of
the top punch hammer.
12)
Add 2 drops of lubricant to the left and right sides of the shaft that holds the bottom embosser
knuckle, between the sides of the knuckle and the rocker arm.
13)
Add 2 drops of lubricant between bottom punch hammer and bottom hammer follower.
