2 - Introduction
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 29 of 356 (
D99875607-91
)
Sensor Name
Function
RI Unload
Blocked when the rear indent cartridge is in the unload position (toward the rear
of the device).
FI Unload
Only used on devices that have the optional front indent module installed.
Blocked when the front indent cartridge is in the unload position (toward the rear
of the device).
MP Card In
Reserved for future use.
Hopper Card In
Reserved for future use.
Hopper1 Present -
Hopper7 Present
Blocked when hopper is in either unlatched or latched. Unblocked when hopper
is fully removed from the hopper deck.
Hopper1 Latch -
Hopper7 Latch
Blocked when hopper is fully latched in the operating position.
Hopper1 Empty -
Hopper7 Empty
Unblocked when there is no hopper installed in the specified hopper slot.
Tipper Cam
Blocked when the tipper heating element is in the up/idle position.
Tipper Grip
Blocked when a card just reaches the rollers on the exit ramp.
Tipper Exit
Blocked when a card just reaches the end of the exit ramp.
