6 - Adjustments
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 339 of 356 (
D99875607-91
)
6.6.4
Set Embossed Character Height Using Software
Using the numbers on the label on the replacement embosser’s base, set the cam angle settings by
following these steps:
1)
Locate the factory default knuckle and Cam Angle settings on the base of the embosser, as shown in
Figure 6-6 - Factory Default Knuckle and CamAngle Settings (TOP VIEW FROM FRONT)
2)
On the touchscreen, navigate to
Menu
>
Settings
>
Edit Config
to open the
Configuration
Editing
password page.
3)
Use the onscreen keypad to enter password
1234567
and press the
E
key.
4)
Use the onscreen keypad to enter password
7654321
and press the
E
key.
5)
Scroll through the settings list to find
CamAngleTop
and
CamAngleBottom
.
6)
Select
FontID1
>
CamAngleTop
, enter the new value in the text entry box at the top right of the
screen, and press the
E
key.
7)
Select
FontID1
>
CamAngleBottom
, enter the new value in the text entry box at the top right of the
screen, and press the
E
key.
8)
Repeat the process for
FontID2
and any other fonts shown on the embosser base.
9)
Press the
Save
button to save the new settings.
