2 - Introduction
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 22 of 356 (
D99875607-91
)
2.8
How to Safely Move Transports By Hand
The safest way to move ExpressCard components is to use the touchscreen to access the
MCP
Commands
page (see section
2.9.1 How to Use the MCP Commands Page
). However, occasionally it
is necessary to move parts by hand. To prevent injury or damage to the device, follow the guidelines in
the following sections.
You can rotate the rollers on all transports by hand to push/pull cards to where they can be removed.
2.8.1
XY Transport Carriage
If you need to move the XY transport carriage by hand,
pull only on the serrated drive belt
as
. This reduces the risk of damaging the transport.
If you need to move the XY carriage along its tracks, gently
pull the carriage to the left side
of the
device before moving so it won’t catch on the image printer.
Figure 2-2 - Move Transports By Pulling Drive Belts
