Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 86 / 132

Key Patrol If this option is enabled, the Key will be able
to Disarm and Re-arm its Partitions during the pro-
grammed
Patrol Time . If a Partition is disarmed by a
Key with the Patrol option enabled, the Partition will
Re-arm automatically when the programmed
Patrol
time of the Partition concerned expires.
Key Clear Panel Calls If this option is enabled, the
Control Panel will clear the running call and all the
queued calls — triggered by events associated with the
Control panel — when the key is recognized.
Key Clear Calls on Partitions If this option is en-
abled, the Control Panel will clear the running call and
all the queued calls — triggered by events associated
with the Key Partitions — when the key is recognized.
In AND Group If this option is enabled, the Key must
be used with another Key or Code to Disarm its Parti-
tions, as set in the
And Keys Codes Num option (refer
to the “Partition” Option Group").
Key Timer If this option is enabled, the Key will be able
to perform its programmed functions ONLY during its
Timer slots (see
Timers options group).
Key Presence If this option is enabled, the Key can be
programmed and used for system access.
Many applications require fewer Keys. This option will
allow you to enable only the required number of keys,
thus simplifying the programming process while in-
creasing the security level. keys which have not been
made
Available can be considered inexistent.
Partitions Select the partitions that the key can arm
and disarm:
Ø
If this option is disabled, the key cannot manage the
partition.
Ø
If this option is enabled, the key can manage the par-
tition.
+
You can arm and disarm only the partitions com-
mon to the key and the reader used.
Default: ONLY Partition n. 1 is enabled.
Users: Keyfobs
The
Keyfobs
options group is for enrolling and setting
keyfob options, as described below.
+
When you manually enroll wireless devices, to
complete enrolment, press the enrolling button of
the wireless device until the device’s LED turns
yellow.
Label This option is to enter a significant description of
a keyfob.
Device ID In the Device ID option, enter the ID number
that you find on the wireless device.
Enter all zeros to remove a wireless device.
Valid Values: three digits for the device type, plus four
digits for the serial number.
Default: 000-0000.
Enabled If this option is enabled the Keyfob can con-
trol the system.
If this option is disabled the Keyfob cannot control the
system, however, it can still be programmed by a
Mas-
ter PIN .
Master PINs can toggle the Enabled status of the
keyFobs (also via the User Menu).
KeyFob Presence If this option is enabled, the Keyfob
can be programmed and used for system access.
Many applications require fewer Keys. This option will
allow you to enable only the required number of
Keyfobs, thus simplifying the programming process
while increasing the security level. Keyfobs which are
not present can be considered inexistent.
Button 4 Set the function of the keyfob’s auxiliary but-
ton
Q
.
Ø
Not used : no function is assigned to the auxiliary but-
ton
Q
.
Ø
Status : the auxiliary button
Q
shows the status of the
system on the keyfob. For more information, refer to
the User Manual.
Ø
Mode B : the auxiliary button
Q
arms and disarms the
partitions as set for mode B.
Ø
Super Key Event : the auxiliary button
Q
causes the
Super Key on Keyfob event.
Ø
Arming Mode B + Super Key Event : the auxiliary but-
ton
Q
arms and disarms the partition as set for mode
B, and causes the Super Key on Keyfob event.
Default: Arming Mode B + Super Key Event
86 Expandable Hybrid Control Panel