Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 15 / 132

IDENTIFICATION OF PARTS
Read this section carefully to get an overall view of the
main components of the Control Panel.
The numbers in boldface (used in this text) refer to the
descriptions in the tables and figures in this section.
The components are generally numbered in clockwise
order. The outlined numbers refer to the common hard-
ware components of the devices and are described
once only — when first encountered.
+
Figures 2 and 3 show the maximum configuration
of the ABSOLUTA Plus control panels, therefore,
some of the components may not be present on
your control panel.
N. DESCRIPTION
1 Main board fixing holes
2 Jumper to disable the activation of the Outputs
and Telephone Actions (Voice Calls, Voice Mes-
sages on AS100, Digital Calls and SMS):
= Actions Enabled (factory settings);
= Actions Disabled.
3 Opening tamper switch connector
4 Wall tamper switch connector
N. DESCRIPTION
5 Holes to fit the IP Module
6 Connector for the IP Module
7 Holes to fit the GSM Module
8 Connector for the GSM Module
9 Microprocessor
10 RS232 Serial Port
11 Terminals for telephone line connection
12 Switching power Supply connector
13 Connector for backup Battery
14 Input terminals for detector connection
15 Programmable terminals as inputs or outputs
16 Terminals for transceiver connection
17 BPI BUS terminals for BPI peripheral connection
18 Terminals for Audio Station connection
19 Terminals for Tamper Line connection
20 Terminals for output device connection (Sirens,
etc.)
21 Diagnostic LED: see “Power connection” on
page 36
22 USB Serial Port for downloading/uploading on
USB pen and PC.
ABSOLUTA Plus IDENTIFICATION OF PARTS 15
1 2 3 4 5 6 7 8 9 1 5 7 10 1
11
12
13
14 15 16 17 18 19
22
20
1 1
21
Figure 1 ABSOLUTA Plus main board parts.