Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 94 / 132

Ø
the connection of the ABSOLUTA app to the Control
Panel.
!
Notification of events through the IP Module to
the ABSOLUTA app can fail from causes inde-
pendent of the control panel and the IP Module
such as, but not limited to, malfunction of the
router, lack of power to the router, malicious or
accidental interruption of the communication
line between the router and the server. Based
on the importance of event notification, it is
suggested to set up a backup communication
channel via the GSM module.
Packet exchange with the Absoluta server can be en-
abled on two ports:
Ø
Enabled on port 80 ;
Ø
Enabled on port 51005 .
Usually port 80 is used. If there are communication
problems with this port, select port 51005.
Default: Enabled on port 80.
Absoluta Server This is a read-only option that shows
the Absoluta Server name.
Local BOSS Incoming Port Enter the number of the
port used by the IP Module to respond to BOSS re-
quests (see “Downloading/Uploading > Connecting the
Control Panel to the PC”).
Valid entries: from 0 to 65535;
Default: 3062.
System Integration Incoming Port Enter the number
of the port used to integrate the ABSOLUTA Plus con-
trol panel with third party software
21
.
Valid entries: 0 to 65535;
Default: 3064.
System Integration Encryption Key Enter an en-
cryption key if the encryption of data packets travelling
over the port for the integration of the ABSOLUTA Plus
control panel with third party software is required. Enter
all zeroes if the encryption key is not required.
Valid entries : up to 32 alphanumerical characters.
Default : all zeroes (disabled).
SMS Messages
This group of options is to setup SMS Messages, as de-
scribed below.
Label Assign a label to the message: this information
is not saved in the control panel, which is why the icon
for downloading the option does NOT change its ap-
pearance when modified.
Message Enter the required message.
94 Expandable Hybrid Control Panel
21 The IP Module makes a port available for integration with third party software, based on ITV2 protocol.