Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 112 / 132

Enroll Keyfob
Confirm 1=Y 2=N
Enroll Repeater
Confirm 1=Y 2=N
8b. Press 2 to not enroll the wireless device and go
back to Step 5 , or press 1 to confirm the enrolling of
the wireless device:
Done !!
9b. Press ESC to go back to step 5 .
+
Check that control panel has properly enrolled all
wireless sirens by activating the wireless siren’s
outputs. For more information, see “1.2) Output
Test” on page 104.
The control panel assigns to the enrolled device a slot,
a logical zone, or a logical output, as described in “Wire-
less device mapping” on page 121.
Using the console, upload the option groups related to
wireless devices to view the enrolled devices, and set
the related options.
2.4) Key enrolling
You can enroll the Digital Keys as follow.
1. Access the Installer menu, as indicated in the para-
graph “Access to the operations”.
INSTALLER
1act. 2prg 3view
2. Select the Programming option by pressing 2 .
INSTALLER 2.1
Voice Messages
3. Select Key programming .
INSTALLER 2.4
Key programming
4. Press ENTER .
Key programming
on Reader ---
5. Select the Key Reader to enroll the Keys, then
press
ENTER .
Key programming
Key ---
6. Select the Key slot, then press ENTER : ALL the se-
lected Key Reader’s LEDs fast blinking to indicate
that it is waiting for a Key.
+
if the display shows the message Key active ,
the selected slot is already used by a Key. Press
ESC and select a free slot or press ENTER to over-
write the position with the new Key.
Key programming
Wait for key
7. Present the Key to the selected Key Reader: the
green indicator light and the Keypad sounds a dou-
ble beep to indicate that the Key has been enrolled
and go back to step
6 .
+
if the display shows the message Key used , the
yellow indicator on the Reader blinks quickly and
the Keypad sounds a single beep, the key is al-
ready enrolled on a different slot. Press
ESC and
go back to step 6 .
112 Expandable Hybrid Control Panel